Monitoring urea concentration at different slope angles in drip fertigation

Abstract

The use of statistical process control tools in irrigation is becoming widespread as it allows for quick and effective investigation and detection of possible problems with drippers, especially when fertilizer is used in irrigation water and different slopes. Therefore, the research used statistical quality control charts to monitor urea concentration at different inclinations of the lateral line. The experiment was conducted in a protected environment at the Irrigation and Fertigation Laboratory - LIF) in the city of Cascavel, Paraná State, Brazil. It followed a randomized block design, in a 4x3 factorial arrangement, in which fertilizer concentrations were evaluated at three slope angles. Experimental plots were divided into two factors. The first is the type of water (clean water from an artesian well and water with a nitrogen fertilizer at 44% N) subdivided into four subplots, representing concentrations of urea (0, 2, 4, and 6 g L^-1). The second factor was slope angle and represented the sub-plots: uphill (2%), level (0%), and downhill (2%). The results show that Shewhart's statistical control charts were sensitive in observing the change in uniformity due to the increase in fertilizer concentration. Water with fertilizer (4 gL^-1) affected uniformity at all studied slope levels. The results also show that high concentrations of fertilizers change the pH of the water. The lowest urea concentrations showed the best distribution uniformity results.

Keywords: control charts, drip irrigation, Shewhart, uniformity.